CORD DETONATING 'A'
Velocity of Detonation : 6500 m/s
Petn Content : 9.5 gm/m
Cord Dia. : 4.8 mm
PVC Insulation of Cord : 5.67 gm/m
APPLICATION
As Detonationg Cord for Civil Blasting.
PEK-1 (Plastic Explosives)
Velocity of Detonation : 6000 to 6500 m/s
Functioning Temp. : 0 to 50 deg C.
Bulk Density : 1.45 gm/cc
Wt. of Each Cartridge : 100 +/- 3gms.
APPLICATION
As Demolition Explosives
In Explosive Welding Expecially Metal Clading.
TNT SLAB 500g MK-2 A/L WITH
INTEGRAL CE PRIMER
Mass of finished slab : 600 gms.
Mass of CE Primer : 32 gms.
Density of TNT filling : 1.55 gm/cc.
Density of CE primer : 1.55 gm/cc.
APPLICATION
Use as demolition device
Very powerful and can pierce even 12mm thick mild steel plate
TNT (TriNitro Toluence)
Grade 1 Purest Grade
Set Point 80.4 C 80.6 C
Flake Size 0.6 mm. 0.6 mm.
APPLICATION
Filling in Bombs & Shells.
HE-Composition & RDX/TNT Composition.
In Pentolite Booster (PETN/TNT)
HNS (Hexa Nitro Stilebene)
Melting point : 310 deg C.
Vacuum stability(at 100 deg C.) : 3 min.
Detonation velocity with varrying : 5600 to 7100 m/s
intensity
APPLICATION
Explosive composition of High Temperature Stability.
As Crystal Modifier of TNT for Filling in Large Calibre
Ammunition.
RDX / TNT(60:40)
Velocity of Detonation : 7700 M/Sec.
Figure of Insensitivity : 100
Content of Dees Wax : 1%
APPLICATION
As high Explosive Composition for Filling in Warhead Shells, Mines,
Bombs & Heat Ammunitions.
HNS(Hexa Nitro Stilebene)
Melting point : 310 deg C.
Vacuum stability(at 100 deg C.) : 3 min.
Detonation velocity with varrying : 5600 to 7100 m/s
intensity
APPLICATION
Explosive composition of high Temperature Stability.
As Crystal Modifier of TNT for Filling in Large Calibre Ammunition.
RDX/WAX (88:12)
Velocity of Detonation : 7960 m/s
Figure of Insensitivity : 110
Sieve spectrum : 50%
APPLICATION
High Explosive Composition for Filling in Hesh Ammunition &
Motars.
TETRYL / GRAPHITED TETRYL
Melting Point : 128.5-129.2'c
Volatile : 0.1% Max.
Vs Test at 120'c Matter : 7.0 ml/5g Max.
Sleving Test : ..
Retention on 1.18mm : nil
Retention 150 micron : 90% Min.
Matter insoluble in Benzene(%) : 0.07 Max.
Matter insoluble in Acetone(%) : 0.0035 Max.
Acidity as HNO3(%) : 0.005 Max.
Heat Test in Minutes : 20 Min.
APPLICATION
Booster for High Explosives.As booster for Rocket launching.
|
