Pilot Parachute Seak MK-10

• This parachute is used for emergency bailing out from HPT-32 aircraft and as the name indicates it is a seat type parachute filled into the seat pan of the aircraft.
  
  

• Taking into the consideration the abandoning speed of the aircraft (110 to 180 Knots),the amximun height(4000m) and the mass of the aircrew (52 to 90 Kg) this parachute assembly has been designed with a 7.31 m (24 ft) dai canopy,a fully adjustable harness and an appropriate pack cover for fitting snugly into the seat pan of the HPT-32 aircraft.It is also provided with a rip cord & housing for its manual operation and an inertia-proof four point quick release box for instant removal of harness after landing.
  
  

SPECIFICATIONS
CONSTRUCTIONAL DETAILS 
Dia. of canopy                      : 7.31 m(24ft)

No. of Gores                        : 24(3.4 m long)

No. of panels                       : 4(Bias cut)

No. of rigging lines                : 24

Effective length of rigging lines   : 5000 mm

Volume of packed parachute          : 1365 Cu.cms.

Dimension of packed Parachute       : 39 x 34 x 11 cms.

Mass of complete assembly           : 9.25 kg

BASIC MATERIAL
Fabric Nylon Low porocity 52 gm.Rip stop weave Undyed/Olive/Green/
Orange confirming to specn. No.ADRDE/Specn/1983/14.

Yarn                                : Nylon 6 or 66,45 denier

Weave                               : Rip stop

Thread per cm.                      : 32

Mass(max)gm sq m.                   : 52 grams	

Air porocity                        : 600-780 cm3/cm2/sec